...
IP and MAC address
To find the MAC IP address we will need to pair the handset to your Wi-Fi network.
...
Navigate to the Status section and press OK.
Network should already be highlighted, press the OK button again.
You should see the IP address under Wi-Fi IPYou should also see the MAC under BSSID, and firmware versions etc. as well.
If you cannot see the IP, reboot the handset and repeat the above steps
To Find the MAC address
Press the Menu button in the centre of the navigational pad on the Dect handset.
Navigate to the Status section and press OK.
Navigate to Phonepress the OK button again.
You should see the MAC address under Wi-Fi MAC
Accessing the Web User Interface
...
Enter in the MAC address of the device you are configuring, only alphanumeric characters, ignoring colons or dashes etc., and the external (WAN) IP address that the handset will be accessing from. (This ensures maximum security during provisioning. Incorrect details could result in a breach)
Search for an existing Identity in the Search Identities field and select the relevant one from the drop-down (You can add 4 Identities to this handset, see Supported Hardware for restrictions).
Select the device model from the drop-down under Device Settings (Fanvil W611W).
Clicking the Save & Activate Auto-Provisioning button on the Device Settings screen in the Byphone Portal allows 10 minutes in which this device can be auto-provisioned by the Byphone system. After 10 minutes, the provisioning server will be closed to this device (until the Save & Activate Auto-Provisioning button is pressed again).
Ensure that on your Fanvil Linkvil W611W, you have the provisioning URL entered into the Static Provisioning Server, server address field. URL: https://granite.byphone.co.uk/v1/provisioning/ as noted in step 2. Set Update on Reboot to avoid having to login to the Web UI for future auto-provisions.
Click Autoprovision Now within the Fanvil Web Gui
...