...
Once you have the IP Address of the base station you can access the WUI via your browser (while on the same local network). Navigate to the IP address in your address bar. If your base station is not in it's default state, you will be met with a screen asking for a username and password, (default username:admin and password:admin). If this is not the case please follow the instructions on the Reset a Yealink page.
You should now see a page similar to the image below.
Here you should see all of the information about your base station, including it's Model/Phone Type, MAC Address and the IP Address you have just used to get here. You will also see a sub-section “Handset&VoIP”, this will be useful once you have provisioned your Dect handset to confirm that it is registered to the server.
- Now go to the Settings tab, and select the Auto Provision section in the left Navbar.
- On this page you will need to set the Server URL for the Byphone system https://granite.byphone.co.uk/v1/provisioning/
- Next you must associate your base station with the Byphone system. Login to your Byphone phone system if not already.
- Click on the Users option in the navbar on the left of the screen.
- Select the user the Dect handset will be associated with, then click on Add Device. (You will require an Identity for this User, if not already created please see Identities section on how to create a new Identity).
- You should now be met with this device's settings page. Here you can alter the label that this device is known as within the system, ensure that it is unique. You can see the Device Settings or delete the device if no longer required. We will concentrate on the device provisioning for now.
- Enter in the MAC address of the device you are configuring (just the alphanumeric characters, no colons or dashes etc.).
- Search for an existing Identity in the Search Identities field and select the relevant one from the drop-down (You can add multiple Identities to a single base station, see Supported Hardware for restrictions).
- Select the device model from the drop-down under Device Settings (Yealink W52P/ Yealink W60B).
- Clicking the “Save & Activate Auto-Provisioning” button on the Device Settings screen in the Byphone Portal allows 10 minutes in which this device can be auto-provisioned by the Byphone system. After 10 minutes, the provisioning server will be closed to this device (until the “Save & Activate Auto-Provisioning” button is pressed again).
- Ensure that on your Yealink base station, you have the provisioning URL entered into the Server URL field, you will also see it again on screen. URL: https://granite.byphone.co.uk/v1/provisioning/ as noted in step 2. Click on the Confirm button to save those settings on the base station.
- Now select the Upgrade section and click on the Reboot button.
The device will then reboot, forcing it to pull down your settings from the provisioning server. This should take a few minutes.
Once booting has finished, you can register your Dect handset to your base station by logging into the base station again with it's IP in your browser (you may be required to enter the new Admin username and password to access your handset settings admin and the devices MAC address in upper case).
- Access the Status tab, and the Handset&VoIP section.
- Here you should see a list of configured identities and Handset details.
- Click on the Start Registration button.
- On the handset, press the OK button, navigate down to the Settings section and press OK again.
- Scroll down to Registration and press OK.
- Register Handset should be highlighted, again press OK.
- Highlight the relevant base (if only using one then choose the first) and press OK.
- Once the handset locates the Base station, you will need to enter the access PIN: 0000 and press OK.
The handset will attempt to register to the base station and associate an identity with that Dect handset. You should then see confirmation of this on the Dect handset screen.
You can now make and receive calls using your new Yealink Dect.