NEC SL2100
- Colm Steele
Trunk Registration
SIP System Information Setup
Found in Advanced Items + VoIP + Networking + SIP Trunks + SIP Trunks - Carrier Mode (Domain Name) + SIP Carrier Mode (Domain Name)
PRG | Item | Setting |
|---|---|---|
10-28-01 | Domain Name | byphone.co.uk |
10-28-02 | Host Name | trunking |
10-28-03 | Domain Assignment | Set to Domain Name |
Sip Server Information
Found in Advanced Items + VoIP + Networking + SIP Trunks + SIP Trunks - Carrier Mode (Domain Name) + SIP Carrier Mode (Domain Name) - Server Setup
PRG | Item | Setting |
|---|---|---|
10-29-05 | Register Mode | Set to manual (Enabled) |
10-29-11 | Registrar Domain name | trunking.byphone.co.uk |
10-29-14 | SIP Carrier Choice | Set as DEFAULT (0) carrier choice |
10-29-15 | Registration Expiry Time | 1800 |
10-29-16 | Register Sub Mode | Set to Disabled |
10-29-19 | Keep Alive by OPTION Message | Set to Enabled |
10-29-22 | Default Gateway | 0.0.0.0 |
10-29-21 | NAT Router | Enable if Router is configured for port forwarding to modify the contact header from private to public IP |
10-29-24 | NAPT Router IP | Required only if using multiple gateways as you need to enter the WAN IP of the network connection. |
10-67-01 | DNS Mode | Set to ON (Enabled) |
10-67-02 | DNS IP Address | Enter the DNS server IP Address as provided by the network provider (or 8.8.8.8) |
Registration information
Found in Advanced Items + VoIP + Networking + SIP Trunks + SIP Trunks - Carrier Mode (Domain Name) + SIP Carrier Mode (Domain Name) - Primary Authentication Information
PRG | Item | Setting |
|---|---|---|
10-36-01 | Registration | Enable ID 00 |
10-36-02 | User ID | Enter Trunk Username |
10-36-03 | Authentication User ID | Enter Trunk Username |
10-36-04 | Authentication Password | Enter Trunk Password |
Sip Trunk Basic Setup
Found in Advanced Items + VoIP + Networking + SIP Trunks + SIP Trunks General Settings + SIP Trunks Basic Settings
PRG | Item | Setting |
|---|---|---|
84-14-06 | SIP Trunk Port | 5060 |
84-14-07 | Session timer value | 0 |
84-14-08 | Minimum session timer value | 1800 |
84-14-09 | Called Party Info | Leave set as default Request-URI |
84-14-10 | URL Type | Leave set as default SIP-URL |
84-14-11 | URL/To Header Setting Information | Leave set as default Proxy Server Domain |
84-14-13 | Incoming/Outgoing SIP Trunk for E.164 | Mode 2 |
84-14-15 | 100rel Setting | Leave set as default Use Default Setting |
84-14-16 | SIP Trunk SIP-URI E.164 Incoming Mode | Mode 2 |
84-14-17 | Call Forward Moved Temporarily Support | Disabled |
84-14-18 | Keep Alive by OPTION Interval Timer | 120 |
84-14-21 | SIP Trunk TLS Port Number | 5061 |
Inbound Routing
PRG | Item | Setting |
|---|---|---|
22-02 | Incoming Call Trunk Setup | Set to DID |
22-11 | DDI Translation Table | If Format set to Digits on Bytrunk, ensure this matches (Default 6) |
Location Setup
Depending on the Format option chosen on Inbound Routes, the below may be required (specifically for e.164 format)
PRG | Item | Setting |
|---|---|---|
10-02-01 | Country Code | Set specific to country system is located within |
10-02-02 | International Access Code | Generally 00 |
10-02-04 | Area Code | Set specific to local area within the country the system is located within |
Outbound CLIs
Outbound Caller ID
Found in Advanced Items + VoIP + Networking + SIP Trunks + SIP Trunks - Carrier Mode (Domain Name) + SIP Carrier Mode (Domain Name) - Calling Party Number for Extensions
Caller ID is validated on the ByTrunk server. Providing the number is on the list then you can change it on 21-19 to present different numbers. (Should include country code at a minimum)
