Ericsson-LG Enterprise iPECS-eMG eMG100

Trunk Registration

CO LINE DATA

• Common Attributes(140)

  • Enter 1-2 for 2 channels (increase as needed)

  • Change CO Type to DID and save changes

  • Enter 3-6 to move unused channels outside range

  • Set CO/IP Group to 21 on outside range and save

• DID Service Attributes(145)

  • Enter 1-2

  • Change DID Conversion table to MODIFY USING FLEXIBLE DID CONVERSION TABLE and save.

SIP DATA     

• SIP Common attributes (210)

  • Set PRIMARY DNS TO 8.8.8.8

  • Save and restart system

• SIP CO Attributes(133)

  • Enter 1-2 in CO range

  • Set PROXY SERVER ADDRESS to trunking.byphone.co.uk

  • Change use outbound proxy to ON

  • Set Domain to trunking.byphone.co.uk

  • Set Registration UID Range to 1-1

  • Change DTMF type to 2833

  • Set SIP USER ID FIXED TABLE INDEX to 1

  • Set offnet call forward – P Asserted ID to CLI

  • Save changes

Open

Open

• SIP User ID Attributes (126)

  • Set Registration USER ID  to ext number 10000002@trunking.byphone.co.uk

  • Set Authentication USER ID to 10000002

  • Set Authentication password to SIP password

  • Set USER ID to Register

  • Set USER ID USAGE to ON

  • Set RING ROUTE TYPE to DID CONVERSION

  • Set DID CONVERSION TYPE to Modify to Flexible DID and save changes

• SIP CO ATTRIBUTES(133)

  • Unregister and register again

  • Go to SIP TRUNK OVERVIEW and refresh

• Common Attributes (111)

  • Change SIP USER TABLE INDEX TO 1

Inbound Routing

• CO/IP Ring assignment (144 )

  • Range 1-3 (day, night, time conditions)

  • Station range eg. 1000 – 1010 would include extensions 1000 to 1010 in ring group

  • Delay should be 0

  • VSF is a voicemail which can be set for NIGHT MODE

  • AA Ring time is an auto attendant

VSF and AA must be set up before they can be selected as routes.

VSF Key set on Ext (127)

Outbound CLIs

• CLIP/COLP (201)

  • Set COLP Table 0 to the first 9 digits of your DDI eg. 442895216

• CID/CPN (151)

  • Set COLP Table index to 0

  • Set CLIP Table index to 0

  • Set Station CLI type to Station CLI 2

• CLI Attributes (113)

  • Station CLI set to last 3 digits of CLI eg. 354

• Sip Co Attributes (133)

  • Under header ID PRESENTATION OPTION set P-Asserted to “Use”

  • Set Privacy CLIR to Anonymous name

  • Under header ID Individuality set the P-Asserted ID to extension outgoing CLI